M.2 PCIe NVMe SSDs | Gen4, Gen3 & Gen2 | AMP Inc.
Mon - Fri: 8:00 - 17:00 PST
Home » Products » M.2 PCIe NVMe

M.2 PCIe NVMe SSDs

Compact PCIe NVMe solid-state storage across Gen4, Gen3 and Gen2 interfaces, with M.2 2230, 2242 and 2280 options for commercial and industrial systems.

Compact M.2 PCIe NVMe Storage

AMP M.2 PCIe NVMe SSDs combine a compact board-level form factor with the bandwidth and low-latency command path of PCI Express and NVMe.

The portfolio spans PCIe Gen4, Gen3 and Gen2 configurations in M.2 2230, 2242 and 2280 form factors. Capacities range from 64GB to 8TB, with 3D TLC, BiCS3 TLC, MLC and selected pSLC options.

Commercial and industrial configurations are available for compact embedded platforms, edge systems, networking equipment and other applications that require fast local storage.

AMP M.2 PCIe NVMe SSD portfolio
InterfacePCIe Gen4 / Gen3 / Gen2NVMe performance varies by series and host support
Form FactorsM.2 2230 / 2242 / 228030mm, 42mm and 80mm board lengths
Capacity Range64GB–8TBVaries by form factor, NAND and series
Sequential SpeedUp to 7000 / 6850 MB/sMaximum read / write on selected Gen4 configurations

Reliability & Management

  • Advanced wear leveling and flash management
  • Error correction and bad-block management
  • End-to-end data-path protection on selected series
  • S.M.A.R.T. drive-health monitoring and NVMe management
  • Power-loss and power-fail protection on selected configurations

Form Factor & Configuration

  • M.2 2230, 2242 and 2280 board lengths
  • Commercial- and industrial-grade options
  • 3D TLC, BiCS3 TLC, MLC and selected pSLC NAND options
  • Firmware customization on selected configurations
  • PCIe Gen4 x4, Gen3 x4, Gen3 x2 and Gen2 x4 series

Configuration note: Capacity, NAND type, performance, temperature grade, firmware features and availability vary by part number. Confirm that the host supports M.2 PCIe NVMe because an M.2 connector does not automatically support both SATA and PCIe NVMe devices.

Available M.2 PCIe NVMe SSDs

Review available commercial and industrial M.2 PCIe NVMe configurations. Select a product to view its capacity, temperature grade and supported features.

M.2 PCIe NVMe SSD Series

Compare AMP’s seven M.2 NVMe series across form factor, PCIe generation, NAND, capacity and operating grade, then expand a series to review linked part numbers.

AMP E14 Series M.2 PCIe NVMe SSDs

AMP E14 Series PCIe Gen4 x4 3D TLC

A multi-form-factor Gen4 portfolio for compact systems requiring capacities up to 8TB.

Interface / NANDPCIe Gen4 x4 | 3D TLC
Form FactorsM.2 2230, 2242 and 2280
Capacity240GB to 8TB, by form factor
Sequential SpeedUp to 3500 MB/s read and 3000 MB/s write
Random PerformanceUp to 500K read / 55K steady-state write IOPS
Operating GradeIndustrial (I) or Commercial (C)
View E14 part numbers
Part NumberCapacityConfiguration
AMPOLW2P440240-MQ060AI(C)*240GBM.2 2230 / 3D TLC
AMPOLW2P440480-MQ060AI(C)*480GBM.2 2230 / 3D TLC
AMPOLW2P440960-MQ060AI(C)*960GBM.2 2230 / 3D TLC
AMPOLW2P4401T9-MQ060AI(C)*2TBM.2 2230 / 3D TLC
AMPOLW2P4403T8-MQ060AI(C)*4TBM.2 2230 / 3D TLC
AMPOLW2P4407T6-MQ060AI(C)*8TBM.2 2230 / 3D TLC
AMPOLW3P440960-MQ060AI(C)*1TBM.2 2242 / 3D TLC
AMPOLW3P4401T9-MQ060AI(C)*2TBM.2 2242 / 3D TLC
AMPOLW3P4403T8-MQ060AI(C)*4TBM.2 2242 / 3D TLC
AMPOLW3P4407T6-MQ060AI(C)*8TBM.2 2242 / 3D TLC
AMPOLW5P440960-MQ060AI(C)*1TBM.2 2280 / 3D TLC
AMPOLW5P4401T9-MQ060AI(C)*2TBM.2 2280 / 3D TLC
AMPOLW5P4403T8-MQ060AI(C)*4TBM.2 2280 / 3D TLC
AMPOLW5P4407T6-MQ060AI(C)*8TBM.2 2280 / 3D TLC
AMP M.2 2280 PCIe Gen4 x4 NVMe SSD

M.2 2280 PCIe Gen4 x4 NVMe

High-performance 2280 storage with capacities up to 8TB for bandwidth-intensive commercial platforms.

Interface / NANDPCIe Gen4 x4 | 3D TLC
Capacity500GB to 8TB
Sequential SpeedUp to 7000 MB/s read and 6850 MB/s write
Form FactorM.2 2280
Operating GradeCommercial
View Gen4 x4 part numbers
Part NumberCapacityConfiguration
AMPOLW5D500-M40WAC500GB3D TLC / Commercial
AMPOLW5DT10-M40WAC1TB3D TLC / Commercial
AMPOLW5DT20-M40WAC2TB3D TLC / Commercial
AMPOLW5DT40-M40WAC4TB3D TLC / Commercial
AMPOLW5P44DT80-M40W0AC8TB3D TLC / Commercial
AMP M.2 2280 PCIe Gen3 x4 BiCS3 TLC SSD

M.2 2280 PCIe Gen3 x4 BiCS3 TLC

High-capacity Gen3 x4 storage using BiCS3 TLC NAND for commercial and industrial configurations.

Interface / NANDPCIe Gen3 x4 | BiCS3 TLC
Capacity240GB to 8TB
Sequential SpeedUp to 3000 MB/s read and 1000 MB/s write
Form FactorM.2 2280
Operating GradeCommercial or industrial, by part number
View BiCS3 TLC part numbers
Part NumberCapacityConfiguration
AMPOLW5D240-N40PAI(C)*240GBBiCS3 TLC / C or I
AMPOLW5D480-N40PAI(C)*480GBBiCS3 TLC / C or I
AMPOLW5D960-N40PAI(C)*960GBBiCS3 TLC / C or I
AMPOLW5D1T9-N40PAI(C)*2TBBiCS3 TLC / C or I
AMPOLW5P340T40-N40P0AI(C)*4TBBiCS3 TLC / C or I
AMPOLW5P340T80-N40P0AI(C)*8TBBiCS3 TLC / C or I
AMP M.2 2280 PCIe Gen3 x4 MLC SSD

M.2 2280 PCIe Gen3 x4 MLC

Gen3 x4 MLC storage for commercial systems requiring a broad 128GB-to-8TB capacity range.

Interface / NANDPCIe Gen3 x4 | MLC
Capacity128GB to 8TB
Sequential SpeedUp to 2750 MB/s read and 1200 MB/s write
Form FactorM.2 2280
Operating GradeCommercial
View Gen3 x4 MLC part numbers
Part NumberCapacityConfiguration
AMPOLW5D128-NM0PAC128GBMLC / Commercial
AMPOLW5D256-NM0PAC256GBMLC / Commercial
AMPOLW5D512-NM0PAC512GBMLC / Commercial
AMPOLW5DT10-NM0PAC1TBMLC / Commercial
AMPOLW5P340T20-NM0P0AC2TBMLC / Commercial
AMPOLW5P340T40-NM0P0AC4TBMLC / Commercial
AMPOLW5P340T80-NM0P0AC8TBMLC / Commercial
AMP M.2 2280 PCIe Gen3 x2 3D TLC SSD

M.2 2280 PCIe Gen3 x2 3D TLC

A DRAM-less NVMe series with ECC and data-path protection for capacity-focused embedded designs.

Interface / NANDPCIe Gen3 x2 | 3D TLC
Capacity64GB to 8TB
ArchitectureDRAM-less
Form FactorM.2 2280
Key FeaturesECC and data-path protection
Operating GradeIndustrial (I) or Commercial (C)
View Gen3 x2 part numbers
Part NumberCapacityConfiguration
AMPOLW5D064-N40NPI(C)*64GB3D TLC / C or I
AMPOLW5D128-N40NPI(C)*128GB3D TLC / C or I
AMPOLW5D256-N40NPI(C)*256GB3D TLC / C or I
AMPOLW5D512-N40NPI(C)*512GB3D TLC / C or I
AMPOLW5DT10-N40NPI(C)*1TB3D TLC / C or I
AMPOLW5P320T20-N40NPI(C)*2TB3D TLC / C or I
AMPOLW5P320T40-N40NPI(C)*4TB3D TLC / C or I
AMPOLW5P320T80-N40NPI(C)*8TB3D TLC / C or I
AMP M.2 2280 PCIe Gen2 MLC industrial SSD

M.2 2280 PCIe Gen2 x4 MLC Industrial

Industrial-grade Gen2 NVMe storage for legacy platforms that require MLC-based configurations.

Interface / NANDPCIe Gen2 x4 | 2D or 3D MLC
Capacity500GB to 8TB
Sequential SpeedUp to 1000 MB/s read and 800 MB/s write
Form FactorM.2 2280
Operating GradeIndustrial
View Gen2 industrial part numbers
Part NumberCapacityConfiguration
AMPOLW5D0500-IM02I500GB2D MLC / Industrial
AMPOLW5D0T10-MM02I1TB3D MLC / Industrial
AMPOLW5D0T20-MM02I2TB3D MLC / Industrial
AMPOLW500D0T40-MM020AI4TB3D MLC / Industrial
AMPOLW500D0T80-MM020AI8TB3D MLC / Industrial
AMP M.2 2230 PCIe Gen4 x4 SSD

M.2 2230 PCIe Gen4 x4 3D TLC / pSLC

Compact 30mm Gen4 storage for space-constrained systems, available in selected TLC and pSLC configurations.

Interface / NANDPCIe Gen4 x4 | 3D TLC or pSLC
Capacity240GB to 960GB TLC; 240GB pSLC
Sequential SpeedUp to 2800 MB/s read and 2300 MB/s write
Form FactorM.2 2230
Operating GradeCommercial or industrial, by configuration
AvailabilityContact AMP for current configurations

Series note: Performance, temperature grade, NAND configuration, firmware features and lifecycle status vary by part number. Confirm all required specifications before ordering.

Applications

M.2 PCIe NVMe SSDs support compact platforms that need high-throughput local storage, a small footprint and commercial or industrial configuration options.

Rail transportation system

Transportation

Compact, high-performance storage for fleet, railway and embedded transportation platforms.

View solutions
Server racks in a data center

Server & Data Center

Fast local storage for boot drives, compact appliances, networking equipment and edge systems.

View solutions
Aircraft representing military and aerospace systems

Military & Aerospace

Selected industrial NVMe configurations support embedded mission-computing and aerospace storage requirements.

View solutions

M.2 PCIe NVMe SSD FAQ

What is the difference between M.2 NVMe and M.2 SATA?

M.2 describes the physical form factor. NVMe drives communicate over PCI Express, while M.2 SATA drives use the SATA interface. Confirm the connector keying and the interfaces supported by the host before selecting a drive.

Which PCIe generations are available?

The portfolio includes selected PCIe Gen4 x4, Gen3 x4, Gen3 x2 and Gen2 x4 series. Actual performance depends on the drive configuration and the PCIe generation and lane count supported by the host.

Which M.2 form factors are available?

Available series include M.2 2230, 2242 and 2280 form factors. All are 22mm wide; the final two digits indicate approximate board length in millimeters. Confirm the host’s mounting position and clearance.

Are commercial- and industrial-grade options available?

Yes. Commercial and industrial configurations are available in selected series and capacities. Temperature range, NAND, firmware features and lifecycle status vary by part number.

Need Help Selecting an M.2 PCIe NVMe SSD?

Share your required form factor, PCIe generation, capacity, NAND type, temperature grade and lifecycle requirements with the AMP team.

Contact AMP

1317 E Edinger Ave,
Santa Ana, CA 92705

714-460-9800
sales@ampinc.com
Copyright 2026 © All rights Reserved