M.2 SATA SSDs | 2242 & 2280 Storage | AMP Inc.
Mon - Fri: 8:00 - 17:00 PST
Home » Products » M.2 SATA

M.2 SATA SSDs

Compact SATA III solid-state storage in M.2 2242 and M.2 2280 form factors for embedded, industrial and application-specific systems.

Compact M.2 SATA Storage

AMP M.2 SATA SSDs combine the established SATA III interface with the compact M.2 Next Generation Form Factor for embedded computers, industrial systems and space-constrained platforms.

The portfolio includes 42mm M.2 2242 drives with capacities from 32GB to 256GB and 80mm M.2 2280 drives with capacities from 64GB to 2TB. Available NAND options include MLC, 2D MLC, 3D MLC, TLC and 3D TLC configurations.

Selected M.2 2280 solutions support TRIM, Native Command Queuing and S.M.A.R.T. monitoring, along with AMP firmware customization for application-specific requirements.

AMP M.2 2280 SATA SSD
InterfaceSATA III 6Gb/sHost must support SATA through the M.2 connector
Form FactorsM.2 2242 / 228042mm and 80mm board lengths
Capacity Range32GB–2TBVaries by form factor and NAND configuration
Sequential SpeedUp to 550 / 500 MB/sMaximum read / write on selected configurations

Reliability & Management

  • Advanced wear leveling and flash management
  • Error correction and bad-block management
  • TRIM and Native Command Queuing on selected drives
  • S.M.A.R.T. drive-health monitoring
  • Low-power solid-state operation

Form Factor & Configuration

  • M.2 2242 and M.2 2280 board lengths
  • Commercial- and industrial-grade options
  • MLC, 2D MLC, 3D MLC, TLC and 3D TLC NAND
  • Firmware customization on selected configurations
  • Capacity options for embedded system requirements

Configuration note: Capacity, NAND type, performance, temperature grade, firmware features and availability vary by part number. Confirm that the host supports M.2 SATA because an M.2 connector does not automatically support both SATA and PCIe NVMe devices.

Available M.2 SATA SSDs

Review available commercial and industrial M.2 SATA configurations. Select a product to view its capacity, temperature grade and supported features.

M.2 SATA SSD Series

Compare AMP’s M.2 2242 and M.2 2280 SATA offerings, then expand a series to review linked part numbers.

AMP M.2 2242 SATA MLC SSD

M.2 2242 SATA MLC

Compact 42mm SATA storage using MLC NAND for commercial and industrial embedded applications.

Interface / NANDSATA III 6Gb/s | MLC
Capacity32GB to 256GB
Sequential SpeedUp to 500 MB/s read and 200 MB/s write
Operating GradeCommercial or industrial, by part number
Form FactorM.2 2242, 22mm × 42mm
Key FeatureCompact embedded-storage footprint
View M.2 2242 part numbers
Part NumberCapacityNAND / Grade
AMPW3T032-NM09AI32GBMLC / Industrial
AMPW3T064-NM09AI64GBMLC / Industrial
AMPW3T128-NM09AI128GBMLC / Industrial
AMPW3T256-NM09AI256GBMLC / Industrial
AMPW3T032-NM09AC32GBMLC / Commercial
AMPW3T064-NM09AC64GBMLC / Commercial
AMPW3T128-NM09AC128GBMLC / Commercial
AMPW3T256-NM09AC256GBMLC / Commercial
AMP M.2 2280 SATA SSD

M.2 2280 SATA

High-capacity 80mm M.2 SATA storage with multiple MLC and TLC configurations for embedded and industrial platforms.

Interface / NANDSATA III 6Gb/s | MLC, 2D MLC, 3D MLC, TLC or 3D TLC
Capacity64GB to 2TB
Sequential SpeedUp to 550 MB/s read and 500 MB/s write
Operating GradeCommercial or industrial, by part number
Form FactorM.2 2280, 22mm × 80mm
Key FeaturesTRIM, NCQ and S.M.A.R.T. options
View M.2 2280 part numbers
Part NumberCapacityNAND / Grade
AMPW5T064-NM09AI64GBMLC / Industrial
AMPW5T128-NM09AI128GBMLC / Industrial
AMPW5T256-NM09AI256GBMLC / Industrial
AMPW5T512-NM09AI512GBMLC / Industrial
AMPW5T10-NM09AI1TBMLC / Industrial
AMPW5T064-NM09AC64GBMLC / Commercial
AMPW5T128-NM09AC128GBMLC / Commercial
AMPW5T256-NM09AC256GBMLC / Commercial
AMPW5T512-NM09AC512GBMLC / Commercial
AMPW5T10-NM09AC1TBMLC / Commercial
AMPW5T0500-IM02I500GB2D MLC / Industrial
AMPW5T0T10-IM02I1TB2D MLC / Industrial
AMPW5T0T20-MM02I2TB3D MLC / Industrial
AMPW5T512-L82L0AI512GBTLC / Industrial
AMPW5T128-N40NPI(C)128GB3D TLC / Commercial or Industrial
AMPW5T256-N40NPI(C)256GB3D TLC / Commercial or Industrial
AMPW5T512-N40NPI(C)512GB3D TLC / Commercial or Industrial
AMPW5TT10-N40NPI(C)1TB3D TLC / Commercial or Industrial
AMPW5TT20-N40NPI(C)2TB3D TLC / Commercial or Industrial

Series note: Performance, temperature grade, NAND configuration, firmware features and lifecycle status vary by part number. Confirm all required specifications before ordering.

Applications

M.2 SATA SSDs support compact platforms that need established SATA compatibility, solid-state reliability and commercial or industrial configuration options.

Rail transportation system

Transportation

Compact SATA storage for fleet, railway and embedded transportation platforms requiring dependable operation.

View solutions
Server racks in a data center

Server & Data Center

SATA storage for compact appliances, networking equipment and embedded server-management systems.

View solutions
Aircraft representing military and aerospace systems

Military & Aerospace

Selected industrial M.2 SATA configurations support embedded mission-computing and aerospace storage requirements.

View solutions

M.2 SATA SSD FAQ

What is the difference between M.2 SATA and M.2 NVMe?

M.2 describes the physical form factor, while SATA and NVMe describe different host interfaces and protocols. M.2 SATA drives require a host slot wired for SATA; an NVMe-only M.2 slot will not operate an M.2 SATA SSD.

What is the difference between M.2 2242 and M.2 2280?

Both are 22mm wide. M.2 2242 is 42mm long, while M.2 2280 is 80mm long. Confirm the supported board length, mounting position and SATA interface before selecting a drive.

Are commercial- and industrial-grade options available?

Yes. The listed M.2 2242 and M.2 2280 portfolios include commercial- and industrial-grade part numbers, depending on capacity and NAND configuration.

Which NAND types are available?

The current portfolio includes MLC, 2D MLC, 3D MLC, TLC and 3D TLC configurations. Availability depends on form factor, capacity and grade.

Need Help Selecting an M.2 SATA SSD?

Share your required form factor, capacity, NAND type, temperature grade and host-interface requirements with the AMP team.

Contact AMP

1317 E Edinger Ave,
Santa Ana, CA 92705

714-460-9800
sales@ampinc.com
Copyright 2026 © All rights Reserved